Still only 7500rpm and 60 miles. Ideas?
+ Reply to Thread
Results 1 to 8 of 8

Thread: Still only 7500rpm and 60 miles. Ideas?

  1. #1
    Member
    Join Date
    Jun 2009
    Posts
    33

    Still only 7500rpm and 60 miles. Ideas?

    Any ideas anyone?
    I can't seem to get past 7400-7500rpm and 60 mile. I have an A kit-r and a 4 inch seadoo centre air intake. A brand new 13/18 Skat Trak prop.

    My mechanic has tested for boost leaks and clutch sliphe has checked the intercooler, the J pipe, oil level and measured the pitch of the prop and checked the wear ring. Everything mechanically is A1 and new.

    It is now going on the seadoo centre computer tomorrow as everyone is out of ideas as to why I am having this problem.

    If anyone can think of anything else?

  2. #2
    Member nedo69's Avatar
    Join Date
    Feb 2009
    Location
    Wollongong
    Posts
    84
    Hey Evan
    Sorry to hear your havin dramas. Im having some of my own so I sympathise.
    If 100% there are no boost leaks and the SC isnt slipping I cant help but still think that there is too much prop for your power output.
    By the way what injectors you runnin?? cause with the A kit wheel and ext IC you should be runnin 42's so you could be starvin for fuel at WOT. Just a thought.
    If you get stuck I have a 4 blade Solas 14/19 that should be ok for your setup that I can lend you to test. But im sure Seadoo centre will work it out. Probably something very simple that no ones thought about.
    FORACIN 05 RXP-Greenwheel SC,XS IC with bleed mod, 42lbs inj, Solas 15/20, Turbosmart Dual Port BOV, 4" front air, Jaz catch can, water box mod, Riva thru hull, Riva Pro block offs, filled ride plate holes, R&D intake grate, Riva Pro nozzle 81mm ring, custom 1" dropped sponsons, Rule bilge, Groco strainer, Hydroturf mats, Autometer boost gauge, Jet Trim seat cover.
    With the magic hands of Richieb and help/advice from Jerry - new speed of 76.3mph @ 8050rpm 1/2 tank of gas,32 air,23C water!!!

  3. #3
    Member nedo69's Avatar
    Join Date
    Feb 2009
    Location
    Wollongong
    Posts
    84
    Evan
    Sorry just thinkin out load,the skat 13/18 as basically a stage II prop as is the Solas 14/19. I was turnin my 14/19 at 7900RPM with pretty much a stock set up so you should be just about on the limiter with your mods.

    Hmmmn fuel??? Let us know what they find
    FORACIN 05 RXP-Greenwheel SC,XS IC with bleed mod, 42lbs inj, Solas 15/20, Turbosmart Dual Port BOV, 4" front air, Jaz catch can, water box mod, Riva thru hull, Riva Pro block offs, filled ride plate holes, R&D intake grate, Riva Pro nozzle 81mm ring, custom 1" dropped sponsons, Rule bilge, Groco strainer, Hydroturf mats, Autometer boost gauge, Jet Trim seat cover.
    With the magic hands of Richieb and help/advice from Jerry - new speed of 76.3mph @ 8050rpm 1/2 tank of gas,32 air,23C water!!!

  4. #4
    Member
    Join Date
    Jun 2009
    Posts
    33
    It was to do with the ecu. Some sensors were turned off for some reason.

    Good guess on the prop though. Seadoo centre seem to think that I have a freak engine , so most probably will have to repicth my prop.

    Testing is this Sunday so we shall take it from there. Thanks for your help, much appreciated.

    What dramas are you having? Tuning skis is such an effort...

  5. #5
    Member nedo69's Avatar
    Join Date
    Feb 2009
    Location
    Wollongong
    Posts
    84
    Finally got all my bits together and installed, tested on the hose and all was good, motor ran fine, no leaks - perfect. My mate thats a mechanic for Seadoo comes over to have a look, and as soon as I fire it up its only runnin on 2 cylinders. Always the way. Anyway thinking its just a coil, but have to wait til monday to get one to check. So looks like another week going by without gettin in the water
    Ahh dont you just love jet ski's
    FORACIN 05 RXP-Greenwheel SC,XS IC with bleed mod, 42lbs inj, Solas 15/20, Turbosmart Dual Port BOV, 4" front air, Jaz catch can, water box mod, Riva thru hull, Riva Pro block offs, filled ride plate holes, R&D intake grate, Riva Pro nozzle 81mm ring, custom 1" dropped sponsons, Rule bilge, Groco strainer, Hydroturf mats, Autometer boost gauge, Jet Trim seat cover.
    With the magic hands of Richieb and help/advice from Jerry - new speed of 76.3mph @ 8050rpm 1/2 tank of gas,32 air,23C water!!!

  6. #6
    Member nedo69's Avatar
    Join Date
    Feb 2009
    Location
    Wollongong
    Posts
    84
    Evan
    How did the testing go???
    FORACIN 05 RXP-Greenwheel SC,XS IC with bleed mod, 42lbs inj, Solas 15/20, Turbosmart Dual Port BOV, 4" front air, Jaz catch can, water box mod, Riva thru hull, Riva Pro block offs, filled ride plate holes, R&D intake grate, Riva Pro nozzle 81mm ring, custom 1" dropped sponsons, Rule bilge, Groco strainer, Hydroturf mats, Autometer boost gauge, Jet Trim seat cover.
    With the magic hands of Richieb and help/advice from Jerry - new speed of 76.3mph @ 8050rpm 1/2 tank of gas,32 air,23C water!!!

  7. #7
    Member
    Join Date
    Jun 2009
    Posts
    33
    I didn't end up going. Had a family bbq to attend. I will try and get out there this weekend though. Did you find what was wrong with your ski.

  8. #8
    Member nedo69's Avatar
    Join Date
    Feb 2009
    Location
    Wollongong
    Posts
    84
    Havent had the chance yet. Got it flipped on its belly re-doing the gel coat on the hull. Beaching it all the time has finally cought up with me and started to peel chunks out of the fiber glass. Ill keep ya posted.
    FORACIN 05 RXP-Greenwheel SC,XS IC with bleed mod, 42lbs inj, Solas 15/20, Turbosmart Dual Port BOV, 4" front air, Jaz catch can, water box mod, Riva thru hull, Riva Pro block offs, filled ride plate holes, R&D intake grate, Riva Pro nozzle 81mm ring, custom 1" dropped sponsons, Rule bilge, Groco strainer, Hydroturf mats, Autometer boost gauge, Jet Trim seat cover.
    With the magic hands of Richieb and help/advice from Jerry - new speed of 76.3mph @ 8050rpm 1/2 tank of gas,32 air,23C water!!!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts