Thread: "worlds First Rxp Drag Race Manifold"

Hi Guys,

Just wanted to let everyone know im now offering my Drag Racing Manifold for Sale $2500 AU.
This Manifold was developed for Drag Racing and was hand built and designed by a reputable NAS Car racer.
Welding was done by Australia's No 1.
We believe this is a World first and now available to anyone interested. This was off my 2006 RXP 80+mph
It bolts straight up in the OEM position and the Throttle body remains is in the exact same position as the OEM so no need to change piping.
It comes complete with Mapping mount,Sensor mount and also Boost pressure fitting.

The inside of the plenum has huge Bell mouths that were designed for optimum performance.

Don't miss out this cost $4500 to develop and huge gains can be expected.

Contact: sales@uspp.com.au

Will ship World wide.

That is a beutiful piece of work...wow!

Originally Posted by ActionR32

Where do you mount the ECU, what injectors and ECU do you need for this set up and how boost is produced

We run the SM4 ECU which is mounted in the front of the hull but we have also run with the stock ECU! We mounted it at the front of the Manafold.

We have run it with both stock injectors and our 83 lb quick squirt injectors

The boost is controlled by the supercharger not the manafold! We have run this with Std boost and 14lbs.

It will work with a stock set up or a High performance craft.

It out performs the stock manafold by a long shot.

Hope this answers your questions.

It appears that is a "long runner" setup,Have you considerd the short runner for low end

Originally Posted by Lugnut

It appears that is a "long runner" setup,Have you considerd the short runner for low end

Hi LUGNUT,

We have experimented with many types of Manifold designs from triple TB's, short, medium, long runners ect.....

Long Runners are the only way to go and it must be the correct length with Bell mouths inside the plenum.

Yeh sure short runners produced big bottom end then it was all over at 5000rpm and as we all know a ski must have a happy medium all the way through the Rev range.

I personally have spent more than $6000-7000 on Manifold designs and have found interesting results.

I hear on the grape vine Piranha-Parts is going to release something special real soon.

Don't ask we what cos i have no idea we all just have to wait......

"I have a feeling it will be intake related"

Originally Posted by US PERFORMANCE PRODUCTS

Hi Guys,

Just wanted to let everyone know im now offering my Drag Racing Manifold for Sale $2500 AU.
This Manifold was developed for Drag Racing and was hand built and designed by a reputable NAS Car racer.
Welding was done by Australia's No 1.
We believe this is a World first and now available to anyone interested. This was off my 2006 RXP 80+mph
It bolts straight up in the OEM position and the Throttle body remains is in the exact same position as the OEM so no need to change piping.
It comes complete with Mapping mount,Sensor mount and also Boost pressure fitting.

The inside of the plenum has huge Bell mouths that were designed for optimum performance.

Don't miss out this cost $4500 to develop and huge gains can be expected.

Contact: sales@uspp.com.au

Will ship World wide.

I cant believe im going to do this! Ill offer the above manafold for $1500 PM Me if you are interested

Hi 1FastTrespiper,

Its not the top end its the instant Acceleration and mid range thats awsome especialy off the start.
Its hard to beat the STD manifold for top end.....

The Manifold was sold this weekend!